Description

APC Back-UPS BE425M 425VA /255Watt 120V 6 outlet

Overview:Power and protect all of your critical electronics while maintaining your internet connection during prolonged outages. The new and improved APC Back-UPS keep you connected to what matters the most by providing more runtime and battery
backup outlets than ever before.

Specification:

– Input: – Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
– Input voltage range for main operations: 88 – 139V
– Maximum Input Current: 5.0A
– Nominal Input Voltage: 120V
– Number of Power Cords: 1
– Cord Length: 1.52m/ 5ft

– Output: – Max Configurable Power (Watts): 255Watts / 425VA
– Output Connections: – NEMA 5-15R (Battery Backup) * 4
– NEMA 5-15R (Surge Protection) * 2
– Nominal Output Voltage: 120V
– Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
– Topology: Standby
– Waveform type: Square wave
– Transfer Time: 6ms typical : 10ms maximum

– Batteries & Runtime: – Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
– Typical recharge time: Approx. 8 hour(s)
– Expected Battery Life (years): 3 – 5
– Battery Volt-Amp-Hour Capacity: 47

– Communications & Management: – Control panel: LED Status display with On Line : On Battery
– Audible Alarm: Alarm when on battery : distinctive low battery alarm

– Surge Protection and Filtering: – Surge energy rating: 180Joules

– Physical: – Maximum Height: 140MM, 14.02CM
– Maximum Width: 253MM, 25.35CM
– Maximum Depth: 105MM, 10.5CM
– Net Weight: 2.6KG

– Environmental: – Operating Temperature: 0 – 40 °C
– Operating Relative Humidity: 0 – 95 %
– Operating Elevation: 0-3000meters
– Storage Temperature: -20 – 50 °C
– Storage Relative Humidity: 0 – 95 %
– Storage Elevation: 0-15000meters
– Audible noise at 1 meter from surface of unit: 40.0dBA

– Conformance: – Approvals: California (CEC) Battery Charger, cTUVus, FCC Part 15 Class B
– Equipment protection policy: Lifetime : $75000

Features:

– Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

– Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

– Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

– Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

– Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.

– Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

– LED status display: Quickly understand unit and power status with visual indicators.

– Audible alarms: Provides notification of changing utility power and UPS power conditions.

– Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment