APC Back-UPS PRO 1500VA – 900Watts W/10 Outlet/LCD/USB (BR1500M2-LM)

Description

APC Back-UPS PRO 1500VA – 900Watts W/10 Outlet/LCD/USB (BR1500M2-LM)

Specifications:

– Input: – Input Connections: NEMA 5-15P
– Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
– Nominal Input Voltage: 120V
– Input voltage range for main operations: 88 – 147V
– Number of Power Cords: 1
– Cord Length: 1.83m/ 6ft
– Maximum Input Current: 12.0A

– Output: – Output Connections: – NEMA 5-15R (Battery Backup) * 6
– NEMA 5-15R (Surge Protection) * 4
– Max Configurable Power (Watts): 900Watts / 1.5kVA
– Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
– Nominal Output Voltage: 120V
– Waveform type: Stepped approximation to a sinewave
– Transfer Time: 8ms typical : 10 ms maximum

– Batteries & Runtime: – Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
– Included Battery Modules: 1
– Typical recharge time: 16hour(s)
– Replacement Battery: APCRBC161
– Expected Battery Life (years): 3 – 5
– RBC Quantity: 2
– Battery Charge Power (Watts): 11Watts
– Battery Volt-Amp-Hour Capacity: 181

– Communications & Management: – Interface Port(s):USB
– Control panel: Multi-function LCD status and control console
– Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

– Surge Protection and Filtering: – Surge energy rating: 1080Joules
– Data Line Protection: RJ45 10/100/1000 Base-T Ethernet protection, Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector)
– Filtering: Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneous

– Physical: – Maximum Height: 260MM, 26.0CM
– Maximum Width: 100MM, 10.0CM
– Maximum Depth: 368MM, 36.8CM
– Net Weight: 12.5KG

– Environmental: – Operating Temperature: 0 – 40 °C
– Operating Relative Humidity: 0 – 95 (non-condensing) %
– Operating Elevation: 0-3000meters
– Audible noise at 1 meter from surface of unit: 45.0dBA

– Conformance: – Approvals: FCC Part 15 Class B, NOM, TUV C-US certified
– Equipment protection policy: Lifetime : $250000

Features:

– Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

– Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

– Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

– Customizable voltage sensitivity: Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

– Customizable voltage-transfer points: Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

– Cold-start capable: Provides temporary battery power when the utility power is out.

– Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

– Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

– Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.

– Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.

– Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

– Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.

– USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.

– LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

– Audible alarms: Provides notification of changing utility power and UPS power conditions.

– Disconnected battery notification: Warns when a battery is not available to provide backup power.

– Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

– Simple battery replacement: Increases UPS availability by allowing quick, easy battery replacement.

– Boost Automatic Voltage Regulation (AVR): Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

– Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment.

– Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.