Description

Forza XG PFC GAMING UPS 1200VA XG-1201LCD

Overview: Forza introduces its new XG Series of Power Factor Correction (PFC) Sinewave UPS Systems, built to provide mission critical protection not only to your high-end computer equipment, but also to keep gamers on top of the action. By integrating
battery backup with advanced sine wave output and the PFC functionality, this line interactive smart UPS guarantees the highest level of reliability and operational performance, for blackout-free gaming even when others are left in the dark.
Clean and stable AC power is constantly delivered to gaming systems, consoles, servers and graphic workstations requiring PFC power source compatibility. Since the XG series is ENERGY STAR qualified, it also reduces energy consumption while
increasing efficiency by maintaining your connected loads energized during outages and other harmful voltage fluctuations in the power line. Featuring a convenient LCD display, coaxial surge protection, USB charging ports and calibrated
voltage regulation in a single unit, the XG series emerges as the best for extreme gaming due to its superb performance, easy battery replacement and slim footprint. It comes in 1200VA and 1500VA configurations.

Specifications:

– General: – Capacity: 1200VA/720W

– Input: – Nominal voltage: 120V120V
– Voltage range: 86-145VAC
– Frequency:45-65Hz(autosensing)
– AC plug style: NEMA 5-15P

– Output: – Nominal voltage: 120V+/-10%
– Frequency: 50/60Hz
– Frequency stability: +/-1Hz battery mode
– Waveform: Pure Sine Wave
– Total outlets: 10
– Full battery/Surge protected outlets: 5
– Surge protection outlets only:5
– Network protection: RJ-45
– Phone/modem/fax protection: RJ-11
– Sat/cable protection: Coaxial
– USB charger: 2.1A max * 2
– USB management: Included with Forza Tracker software

– Battery: – Battery type and quantity: 12V/9Ah * 2
– Backup time: Approx 28mins
– Recharge time: 6 hours to 90% after complete discharge

– Voltage regulation: – High cutoff: 145V+/-3%
– Boost 1: 89V-108V+/-3%
– Buck: 132V-145V+/-3%
– Low cutoff: 89V-89V+/-3%

– Frequency regulation: – Automatic frequency selection: Included

– Line/battery transfer: – Typical transfer time: 2-4ms
– Low line transfer to battery: 89VAC
– High line transfer to battery: 145VAC

– Alarms/indicators: – Visual indicators: Easy to read LCD screen with a blue backlight that displays input voltage, output voltage, battery capacity, load level, and UPS status
– Audible: Battery mode: Beeps every 10 bseconds
– Low battery: Beeps once vevery second
– Overload: Beeps once every 0.5 second
– Fault: Continuous beep

– Protection: – Full protection: Voltage regulation, overload, output short, fan lock, discharge and overcharge protection
– Joules: 510J

– Special features: – “Cold start” option: Included
– Auto charge: Included
– Easy battery Replacement: Included

– Environment: – Operating temperature: 32-104°F
– Storage temperature: -4-122°F
– Relative humidity: 0-90% non-condensing
– Audible Noise: <40dB at one meter

– Physical appearance: – Power switch: Push button
– Housing: Fire retardant plastic
– Colour: Black
– Dimensions: 16.1×3.9x11in
– Weight: 25.8lb

Features:

– Interactive topology: Interactive UPS offer a cost effective solution with low energy consumption ratings, extending the overall life cycle of batteries. Voltage regulation is accomplished without switching to battery mode.

– Battery backup: Supplies battery-derived backup power during blackouts, preventing loss of critical information and minimizing equipment stress caused by a hard shutdown. Delivers reserved energy long enough for equipment to properly shut down.

– Automatic voltage regulation (AVR): Provides clean and stable AC power by automatically increasing low voltages during brownouts and decreasing overvoltages without tapping into the reserved battery power when irregularities are present on the
main utility line.

– Automatic shut-off: Guard your equipment against potentially damaging power fluctuations and other irregularities in the electrical supply by shutting down the power when voltage levels become too low or too high.

– Surge protection, overload protection, electric discharge and voltage protection: Diverts excess voltage away from connected equipment during power surges or power spikes without reducing battery power used to run primary critical equipment.
Extends battery life by preventing system overloads and controlling charging currents.

– Resettable circuit breaker: Automatically prevents the flow of electricity in an electric circuit as a safety measure upon detecting undesirable high voltage levels. Can be reset to resume operation.

– MOV Technology: Metal Oxide Varistor (MOV) technology helps absorb and it redirects transient energy preventing stray electricity from reaching protected equipment.

– Thermofuse protection: Instantly disconnects the power when internal temperatures become dangerously high.

– Power filters: Reduces electromagnetic interference (EMI) and radio frequency interference (RFI) to block unwanted noise, providing clean and distortion-free electricity to all power outlets.

– Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

– Battery self-test: Ensures early failure notifications of bad or old batteries for immediate replacement, preventing any unexpected and unforeseen backup power issues.

– Audible alarm: Provides audible notification of changing utility power and UPS power conditions for when the UPS is installed in hard to reach places or not easily seen by the user.

– Flame retardant material: All of our products are constructed with fire retardant ABS material, guaranteeing that if any failures are present, the equipment will not go up in flames.

– Cold start function: Reserves temporary battery power used to start up the UPS in battery mode when the utility power is out. Restores immediate emergency power to the load after installing new batteries.

– Data line protection: Built-in data line protection prevents power surges that travel through telephone or Ethernet lines from causing damage to sensitive electronics.

– Status LCD: Displays live status of the UPS with detailed information on battery and power conditions, alerting users to potential problems before they can affect equipment and cause costly downtime.

– Communication ports: USB port enables the automatic shutdown function, safely powering down connected computers so as to prevent important data loss. Remotely manage and monitor UPS operations with the included user-friendly dashboard
interface.

– Forza tracker management software: Allows control and monitoring of multiple UPS units through a network connection. The software also prevents data loss from power outages by safely shutting down the UPS units while allowing the immediate
detection and correction of any operation issues with minimal or no delay.

– UL tested: Tested to UL1778 standards for electrical safety and compliance. Recognized by global laboratories.

– Simple battery replacement: Avoid tedious battery access thanks to our convenient design. Makes the replacement of batteries fast and easy, reducing average times to service the units.

– Transformer block spacing: Specifically designed for flexible deployment, aimed to accommodate various sized adapters and large wall plugged power transformers.

– USB Charging ports: Equipped with reliable surge protection and latest USB charging capabilities for your tablet, smartphone and other portable electronic devices.

– Coaxial protection: Helps protect sensitive and mission critical surveillance equipment from damage due to potential overvoltage and electrostatic discharges on coaxial transmission lines.

– Ventilation system: Rear mounted extraction fan helps remove excess heat from the inside housing, guaranteeing to keep components within acceptable operating temperatures.

– Energy Star: Certified energy-efficient product that offer savings on energy bills without sacrificing performance, features, and comfort.

– Pure Sinewave: Power equal to that generated by the utility company, guaranteed to produce a cleaner output for sensitive equipment, improving overall performnace and efficiency.