APC Back-UPS PRO 700VA/420Watts 120v 6-Outlet (BR700G)

Description

APC Back-UPS PRO 700VA/420Watts 120v 6-Outlet (BR700G)

Overview: The Back-UPS Pro provides abundant battery backup power, so you can work through medium length power outages. It safeguards your equipment against damaging surges and spikes that travel along utility and data lines. The Back-UPS Pro
also features automatic voltage regulation (AVR), which instantly adjusts high and low voltages tosafe levels, so you can work indefinitely during brownouts and overvoltages. The Back-UPS Pro also includes unique “green” features, like power-
saving outlets that automatically turn off idle peripherals. A high efficiency charging system and “AVR Bypass” also reduce power consumption. With the rest of the Back-UPS Pro’s standard features, this is the perfect unit to protect your
productivity from the constant threat of bad power and lost data.

Specifications:

– Input: – Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
– Input voltage range for main operations: 88 – 143V
– Input Connection; 6 ft cord with NEMA 5-15 plug

– Output: – Output Capacity: 700 VA / 420 Watts
– Output Volt. / Freq. (on utility): 120V / 60Hz
– Output Volt. / Freq. (on battery): 115V +/-8% / 60Hz
– Topology: Line Interactive
– Waveform type: Stepped approximation to a sinewave
– Transfer Time: 8ms typical : 12ms maximum
– Output Connections: – 6 total NEMA 5-15R outlets:
– 3 battery & surge
– 3 surge protection only (incl. 2 Controlled outlets)

– Batteries & Runtime: – Battery Type: Sealed, lead-acid, maintenance-free
– Included Battery Modules: 1
– Typical recharge time: Approx. 12 hour(s)
– Replacement Battery: RBC17
– Expected Battery Life (years): 3 – 5
– Extended run battery pack compatibility: No
– RBC Quantity: 1
– Battery Charge Power (Watts): 7Watts
– Battery Volt-Amp-Hour Capacity: 86

– Communications & Management: – Interface Port(s):USB
– Auto-Shutdown Software: PowerChute Personal Edition (via USB and serial interface)
– Alarms: Visual (LCD) and audible alarms

– Surge Protection and Filtering: – Surge energy rating: 354Joules
– AC Power Surge Protection: All outlets
– Data Line Protection: Network line – 10/100/1000 Base-T Ethernet (RJ-45 connector), Coaxial cable for CATV/SATV/modem/Audio-Video (coax connector)
– Filtering: Full time multi-pole noise filtering :5% of IEEE surge let-through : zero clamping response time: instantaneous

– Physical: – Color: Black
– Maximum Height: 190MM, 19.0CM
– Maximum Width: 91MM, 9.1CM
– Maximum Depth: 310MM, 31.0CM
– Net Weight: 7.15KG

– Safety: – Certification/Approvals: FCC Part 15 Class B, FCC Part 68, NOM, UL 1778

Features:

– Cold-start capable: Provides temporary battery power when the utility power is out.

– Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

– Customizable voltage sensitivity: Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

– Customizable voltage-transfer points: Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

– Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.

– Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

– Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

– Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

– Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

– Disconnected battery notification: Warns when a battery is not available to provide backup power.

– Audible alarms: Provides notification of changing utility power and UPS power conditions.

– USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.

– LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

– Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

– Simple battery replacement: Increases UPS availability by allowing quick, easy battery replacement.

– Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment.

– Boost Automatic Voltage Regulation (AVR): Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

– Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

– Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.

– Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.

– Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.